Lightspeed Lightspeed Settings

Return To | Guides Home | Lightspeed Admin

Map Products to Lights

Mapping Products to Lights assigns an individual product code to each light in the Lightspeed FastTrack system To map all necessary products to lights complete the following:

1. After selecting 'Map Products to lights' the operator will select the needed pickign zone
   • Only applicable if multiple FastTrack pick zones are used
   • Lightspeed will automatically select the zone if one zone is in use
2. Using the following information select the needed product light
   • Gateway ID
   • Tag Address
   • Current Product
   • Rack Section
3. Select 'Edit' to adjust the given product light
4. Search for the needed product to be assigned using the following
   • Scroll to product description
   • Clicking into the drop down box and typing the product description
5. When the needed product has been selected choose 'Update' at the right to confirm the selection

Map Products for Mobile

Mapping products for mobile through the administrator page gives the operator the ability to see all racks and sections to adjust all product locations

1. Select the needed mobile picking zone
   • If only one mobile picking zone the zone will be automatically selected
2. Using the pick zone diagram find the necessary section to expand
   • Expanding a section displays all rows and locations available
3. Select the product location to be adjusted
4. Use the product selection dialog box to assign the new product
5. Commands include:
   1. Save
      • Save the adjusted product
   2. Print/Save
      • Print product label from receipt printer and save changes
   3. Print
      • Print product label from receipt printer
   4. Cancel