Lightspeed Lightspeed Settings

Return To | Guides Home | Lightspeed Admin

Map Products to Lights

Mapping Products to Lights assigns an individual product code to each light in the Lightspeed FastTrack system To map all necessary products to lights complete the following:

1. After selecting 'Map Products to lights' the operator will select the needed pickign zone
   • Only applicable if multiple FastTrack pick zones are used
   • Lightspeed will automatically select the zone if one zone is in use
2. Using the following information select the needed product light
   • Gateway ID
   • Tag Address
   • Current Product
   • Rack Section
3. Select 'Edit' to adjust the given product light
4. Search for the needed product to be assigned using the following
   • Scroll to product description
   • Clicking into the drop down box and typing the product description
5. When the needed product has been selected choose 'Update' at the right to confirm the selection

Map Products for Mobile

Mapping products for mobile through the administrator page gives the operator the ability to see all racks and sections to adjust all product locations

1. Select the needed mobile picking zone
   • If only one mobile picking zone the zone will be automatically selected
2. Using the pick zone diagram find the necessary section to expand
   • Expanding a section displays all rows and locations available
3. Select the product location to be adjusted
4. Use the product selection dialog box to assign the new product
5. Commands include:
   1. Save
      • Save the adjusted product
   2. Print/Save
      • Print product label from receipt printer and save changes
   3. Print
      • Print product label from receipt printer
   4. Cancel

Map Products for Mobile (Alternate)

Using the alternate location for mapping products for mobile allow the operator to scroll locations as well as find what location is currently being held by a selected product Adding a product to a given location:

1. Use the scroll selections to select the needed location
   • The currently mapped product will be displayed
2. Using the search input find the correct product to add
   • If the product is currently mapped elsewhere the location will be shown
3. Select 'Save' to make the entered changes
   • Select 'Save and Print' to confirm changes a print product label from receipt printer

Assign Product Images

Product images can be added using the iPad as well as the Lightspeed administrator page. To add images through the adminstrator page use the following steps:

1. Use the search dialog to find the needed product
   • Begins with...
   • ...Contains...
   • Search with CODE
2. After highlighting the needed product select 'Browse' to browse to a folder with the wanted file
3. When the product image has been selected confirm 'Open' to upload the product image to the Lightspeed database

Product Overrides

Adding a product override through the adminsitrator page allows the operator to create an automated product swap for a given time span. The overrides that are created will apply an automatic one time product swap for all orders that contain the given items To create a product override complete the following:

1. Select 'Add New Override'
2. Using the dialog box complete the following information:
   1. 'Override This Product'
      • Select item that will appear in original order from provider to be overridden
   2. 'Replace With This Product'
      • This item will be picked in place of the original item selected in all applicable orders
   3. 'Effective Date'
      • Beginning pick date for the given override
   4. 'End Date'
      • Final pick date for the override

• Once the end date passes for this override the original product if on any provider orders will once again show up in the Lightspeed system to be picked